Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Ore Corrugated Sidewall Belt Conveyor for Mining and Mineral Processing Plant
Introduction
This machine is a continuously conveying equipment for loose bulk material such as coal, sand, stone, grain, etc and some powdered material, so its slope of application is very wide, including mine, cement plant, chemical industry, metallurgy and agriculture, electric power, light industry, grain, port, shipping ect, when the mateial need to be conveyor at a big inclined angle, the steeply inclinded belt conveyor also could conveying material vertically.
Working Principle
The horizontal loading section a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
Technical Parameter
| Belt Width (mm) | Height of Sidewall (mm) | Belt Speed (m/s) | Angle of Inclination (°) | Capacity (m³/h) |
| 500 | 80 | 0.8-2.0 | 30-90 | 84 |
| 100 | 112 | |||
| 120 | 98 | |||
| 650 | 100 | 0.8-2.0 | 156 | |
| 120 | 140 | |||
| 160 | 186 | |||
| 800 | 120 | 0.8-2.5 | 186 | |
| 160 | 318 | |||
| 200 | 360 | |||
| 1000 | 160 | 1.0-2.5 | 428 | |
| 200 | 483 | |||
| 240 | 683 | |||
| 1200 | 160 | 1.0-3.15 | 535 | |
| 200 | 765 | |||
| 240 | 1077 | |||
| 300 | 1358 | |||
| 1400 | 200 | 1.0-3.15 | 920 | |
| 240 | 1298 | |||
| 300 | 1657 | |||
| 400 | 2381 | |||
| 1600 | 200 | 1.25-3.15 | 1074 | |
| 240 | 1515 | |||
| 300 | 1953 | |||
| 400 | 2807 | |||
| 1800 | 240 | 1.25-4.0 | 2200 | |
| 300 | 2724 | |||
| 400 | 4106 | |||
| 500 | 5036 |
Capacity is under 30° angle and maximum belt speed.
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
| ♦ Material to be processed:
| ♦ Top horizontal section length: m |
| ♦ Bulk density: t/m3 | ♦ Conveyor angle: ___° |
| ♦ Water content: % | ♦ Lifting height: ___m |
| ♦ Material temperature: °C | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Downstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material is sticky or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Granule size of material: mm | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Max. Granule size: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Handling capacity: t/h | ♦ Working environment temperature: °C |
| ♦ Conveying length: m | ♦ Working power supply: 3 Phase V Hz |
| ♦ Bottom horizontal section length: m | ♦ Quantity: sets |