Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
TB Galvanized Steel Grain Bucket Elevator Transporter For Clinker
Introduction
Bucket elevator is suitable for vertical transmission of powder, granular and small block and less abrasive bulk materials, which has a small requirement for the type of materials, characteristics and block degrees.It can raise powder, granular and bulk materials, and abrasive materials such as grain, coal, cement, crushed ore, etc.
Working Principle and Application
Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chains, above or below which is a drive sprocket and a divert sprocket. Continuous chain or belt bucket elevator for cement is generally equipped with chassis to prevent the dust flying into the bucket elevator.
Advantages and Features
Excellent sealing, less environmental pollution.
The bucket elevator wheels have bolted rims easily replaceable fabricated in wear resistant steel.
Symmetrical weight distribution to long life of chain and driveshaft.
Energy conservation and less maintenance ensure the machine a very low cost.
Advanced design principle has ensured the reliability of machine operation.
High manufacture accuracy. The housing case is of good rigidity and beautiful appearance by the edge folding and intermediate beading.
Lifting height up to 60m.
Compact installation arrangement.
Height can be customized according to your need.
Technical Parameter
| Plate Chain Bucket Elevator | |||||||
| Model | TB250 | TB315 | TB400 | TB500 | TB630 | TB800 | TB1000 |
| Capacity (m³/h) | 20~29 | 51~72 | 85~121 | 135~191 | 207~294 | 281~398 | 398~565 |
| Max. Particle Size (mm) | 60 | 60 | 80 | 100 | 125 | 125 | 150 |
| Bucket Type | J | T | T | T | T | T | T |
| Bucket Volume (L) | 4.7 | 11.8 | 25.3 | 50 | 96 | 130 | 232 |
| Bucket Speed (m/s) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Plate Chain Pitch (mm) | 125 | 125 | 160 | 200 | 250 | 250 | 315 |
| Plate Chain No. | 1 | 2 | 2 | 2 | 2 | 2 | 2 |
| Max. Lifting Height (m) | 50 | 40 | 40 | 40 | 40 | 30 | 30 |
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
| ♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
| ♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
| ♦ Granule size of material: mm | ♦ Working environment temperature: °C |
| ♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
| ♦ Handling capacity: t/h | ♦ Quantity: sets |