Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Industry Chain Bucket Elevator In Conveyors NE Food Processing
Introduction
NE type bucket elevator’s traction configuration is plate chain , which is used for vertically transporting powder , granular and block material , and also high grinding material , such as coal powder , slag , limestone , cement raw material , cement clinker , cement , coal , dry clay etc , material temperature is less than 250℃. Max. Lifting height can be 40m .It is special for cement, so we also call it cement bucket elevator.
Advantages and Features
1. Efficient bucket elevator machine with large capacity, high lifting height.
2. With kinds of buckets, to meet the requirement of different types of material.
3. THG bucket elevator adopts alloy steel ring chain, after surface treating and heat treating, moderate hardness, high strength, better abrasive resistance.
4. TDG bucket elevator adopts steel cord rubber belt, good toughness, high strength.
5. Head, tail parts and middle housing cases with good sealing, no material and dust leaked, with no pollution.
6. With hold back to prevent material back flow when shut down in an emergency.
7. Bottom adopts counter weight take-up device, make itself automatic take-up, to avoid belt track slip or chain take off.
Technical Parameter
| NE type Cement Bucket Elevator | |||||||||||
| Model | NE15 | NE30 | NE50 | NE100 | NE150 | NE200 | NE300 | NE400 | NE500 | NE600 | NE800 |
| Capacity (m3/h) | 15 | 32 | 60 | 110 | 170 | 210 | 320 | 380 | 470 | 600 | 800 |
| Max. Particle Size (mm) | 40 | 55 | 60 | 70 | 90 | 100 | 125 | 130 | 140 | 150 | 165 |
| Bucket Volume (L) | 2.5 | 7.8 | 15.7 | 35 | 52.2 | 84.6 | 127.5 | 182.5 | 260.9 | 330.2 | 501.8 |
| Bucket Width (mm) | 250 | 300 | 300 | 400 | 600 | 600 | 600 | 700 | 700 | 700 | 800 |
| Bucket Spacing (mm) | 203 | 305 | 305 | 400 | 400 | 500 | 500 | 600 | 700 | 700 | 800 |
| Bucket Speed (m/s) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Max. Lifting Height (m) | 35 | 50 | 45 | 45 | 45 | 40 | 40 | 40 | 30 | 30 | 30 |
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
| ♦ Material to be processed: | ♦ Lifting height (distance between inlet and outlet): m |
| ♦ Bulk density: | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Water content: | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material temperature: | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is corrosive or not: | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Material is sticky or not: | ♦ Working environment: |
| ♦ Granule size of material: | ♦ Working environment temperature: |
| ♦ Max. Granule size: | ♦ Working power supply: |
| ♦ Handling capacity: | ♦ Quantity: |