Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
U Type Auger Screw Conveyor High Temperature Horizontal For Cement
Introduction
Trough screw conveyor is a continuous conveying equipment for conveying powder, granular and dry bulk materials. It is composed of bearing seat, spiral blade, spiral shaft, suspension bearing, conveyor housing and transmission device. It can be combined with single screw or multi screw combination equipment to meet the special requirements on site. It has a slotted tube, multiple inlets and outlets, and a maximum angle of 20 °. The rotation of the blade is started by the motor, and then the material is transported to the outlet along the spiral line.
Features:
1. The motor reducer could be installed on the top or the bottom.
2. Conveyor has big transport capacity, long distance available.
3. Stable and controllable start, continuous and highly efficient operation.
4. The conveying could be the level or the inclined.
5. The blade could be entity spiral or belt spiral.
Technical Parameter:
| LS screw conveyor specification & technical parameters | |||||||||||
| Type | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | LS630 | LS800 | LS1000 | LS1250 | |
| Diameter/mm | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | |
| Screw pitch/mm | 160 | 200 | 250 | 315 | 355 | 400 | 450 | 500 | 560 | 630 | |
| technical parameters | n | 112 | 100 | 90 | 80 | 71 | 63 | 50 | 40 | 32 | 25 |
| Q | 8 | 14 | 24 | 34 | 64 | 100 | 145 | 208 | 300 | 388 | |
| n | 90 | 80 | 71 | 63 | 56 | 50 | 40 | 32 | 25 | 20 | |
| Q | 7 | 12 | 20 | 26 | 52 | 80 | 116 | 165 | 230 | 320 | |
| n | 71 | 63 | 56 | 50 | 45 | 40 | 32 | 25 | 20 | 16 | |
| Q | 6 | 10 | 16 | 21 | 41 | 64 | 94 | 130 | 180 | 260 | |
| n | 50 | 50 | 45 | 40 | 36 | 32 | 25 | 20 | 16 | 13 | |
| Q | 4 | 7 | 13 | 16 | 34 | 52 | 80 | 110 | 150 | 200 | |
| n---Rotation Speed (r/min), Allowable Deviation < 10% Q---Capacity (m3/h), Filling Factor = 0.33 | |||||||||||
Selection Conditions
| ♦ Material to be processed: _ | ♦ Installation angle: ___° (if the installation is inclined) |
| ♦ Bulk density: t/m3 | ♦ lifting height: ___m (if there is slope angle) |
| ♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
| ♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |