Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Introduction
Screw conveyor uses revolving screw to move the conveyor material in fixed casing, the bearings of head and tail are moved to shell, hanger bearing adopts sleeve bearing, which have dust proof sealing device, bearing bush usually adopts powder metallurgy,convey concrete adopts felt bushing, hanger shaft and screw shaft are connected by slider.
Application
LSY series cement concrete screw auger conveyor is widely used in building materials, metallurgy, chemical, electric power, coal, machinery, light industry, grain and food industry, suitable for conveying powder, granular, small pieces of materials, such as cement, coal, grain, chemical fertilizer, ash, sand, coke, etc. should not be easily perishable, viscous, easy to agglomerate the material. Commonly seen in the food industry, these conveyors transport ingredients to and from mixers, ovens and vats and need to be sterile at all times. Therefore, they are commonly made of stainless steel, a smooth food grade metal that is less likely to contaminate edible ingredients than other materials and is easily cleaned.
Technical Parameter:
| LS screw conveyor specification & technical parameters | |||||||||||
| Type | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | LS630 | LS800 | LS1000 | LS1250 | |
| Diameter/mm | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | |
| Screw pitch/mm | 160 | 200 | 250 | 315 | 355 | 400 | 450 | 500 | 560 | 630 | |
| technical parameters | n | 112 | 100 | 90 | 80 | 71 | 63 | 50 | 40 | 32 | 25 |
| Q | 8 | 14 | 24 | 34 | 64 | 100 | 145 | 208 | 300 | 388 | |
| n | 90 | 80 | 71 | 63 | 56 | 50 | 40 | 32 | 25 | 20 | |
| Q | 7 | 12 | 20 | 26 | 52 | 80 | 116 | 165 | 230 | 320 | |
| n | 71 | 63 | 56 | 50 | 45 | 40 | 32 | 25 | 20 | 16 | |
| Q | 6 | 10 | 16 | 21 | 41 | 64 | 94 | 130 | 180 | 260 | |
| n | 50 | 50 | 45 | 40 | 36 | 32 | 25 | 20 | 16 | 13 | |
| Q | 4 | 7 | 13 | 16 | 34 | 52 | 80 | 110 | 150 | 200 | |
| n---Rotation Speed (r/min), Allowable Deviation < 10% Q---Capacity (m3/h), Filling Factor = 0.33 | |||||||||||
Selection Conditions
| ♦ Material to be processed: _ | ♦ Installation angle: ___° (if the installation is inclined) |
| ♦ Bulk density: t/m3 | ♦ lifting height: ___m (if there is slope angle) |
| ♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
| ♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |