Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Abrasion Proof Lifting Sugar Machine Bucket Elevator For Cement Plant
Introduction
Abrasion Proof Lifting Sugar Machine Bucket Elevator For Cement Plant is designed to work together with silo, which adopts special belt as the traction components.
Abrasion Proof Lifting Sugar Machine Bucket Elevator For Cement Plant specially equipped with 2 kinds of bucket, steel bucket or plastic bucket as an option, to adapt to the transportation of various materials.
Abrasion Proof Lifting Sugar Machine Bucket Elevator For Cement Plant is especially suitable for lifting materials with small particle size and loose density less than1t/m3.
Abrasion Proof Lifting Sugar Machine Bucket Elevator For Cement Plant is widely used for conveying powder, granular and non-small-block mill and grinding of small materials, such as coal, cement, stones, sand, clay, ore and so on.
Advantages and Features
1. Efficient bucket elevator machine with large capacity, high lifting height.
2. With kinds of buckets, to meet the requirement of different types of material.
3. THG bucket elevator adopts alloy steel ring chain, after surface treating and heat treating, moderate hardness, high strength, better abrasive resistance.
4. TDG bucket elevator adopts steel cord rubber belt, good toughness, high strength.
5. Head, tail parts and middle housing cases with good sealing, no material and dust leaked, with no pollution.
6. With hold back to prevent material back flow when shut down in an emergency.
7. Bottom adopts counter weight take-up device, make itself automatic take-up, to avoid belt track slip or chain take off.
8. Increase speed control sensor and mechanical level detector, it is matched by customized.
Technical Parameters
| TZD type Silo Bucket Elevator | |||||||||||
| Model | Belt Width (mm) | Head Pulley Diameter (mm) | Tail Pulley Diameter (mm) | Bucket Speed (m/s) | Head Shaft Rotation Speed (r/min) | Steel Bucket Volume (L) | Steel Bucket Spacing (mm) | Steel Bucket Capacity (t/h) | Plastic Bucket Volume (L) | Plastic Bucket Pitch (mm) | Plastic Bucket Capacity (t/h) |
| TZD200 | 200 | 630 | 500 | 1.76 | 53.5 | 1.21 | 300 | 10 | 1.21 | 300 | 10 |
| 1.76 | 53.5 | 150 | 20 | 150 | 20 | ||||||
| 2 | 60 | 125 | 30 | 125 | 30 | ||||||
| 2.75 | 83.3 | 105 | 50 | 105 | 50 | ||||||
| TZD250 | 250 | 630 | 500 | 1.76 | 53.3 | 2.35 | 150 | 30 | 2.35 | 150 | 30 |
| 1.76 | 53.3 | 125 | 50 | 125 | 50 | ||||||
| 2.42 | 73.5 | 125 | 80 | 125 | 80 | ||||||
| 3 | 91.9 | 125 | 100 | 125 | 100 | ||||||
| TZD300 | 300 | 710 | 565 | 1.93 | 52.5 | 6 | 215 | 80 | 3.1 | 145 | 50 |
| 2.2 | 60 | 215 | 100 | 145 | 80 | ||||||
| 3.05 | 82.2 | 215 | 150 | 145 | 100 | ||||||
| TZD400 | 400 | 710 | 565 | 1.93 | 52.5 | 8.4 | 215 | 100 | 6.1 | 195 | 80 |
| 2.2 | 60 | 215 | 150 | 195 | 100 | ||||||
| 3.05 | 82.2 | 215 | 200 | 195 | 150 | ||||||
| TZD500 | 500 | 800 | 655 | 1.97 | 47 | 10.9 | 215 | 150 | 11.5 | 255 | 100 |
| 2.2 | 52.8 | 215 | 200 | 255 | 150 | ||||||
| 3.1 | 74 | 215 | 300 | 255 | 200 | ||||||
| TZD650 | 650 | 800 | 655 | 2.2 | 52.8 | 2X6 | 215 | 200 | 2X3.1 | 145 | 150 |
| 2.76 | 66 | 215 | 300 | 145 | 200 | ||||||
| 3.87 | 92.5 | 215 | 400 | 145 | 300 | ||||||
| TZD800 | 800 | 1140 | 930 | 2.5 | 41.6 | 2X8.4 | 215 | 400 | 2X6.1 | 195 | 200 |
| 3.15 | 52.5 | 215 | 500 | 195 | 300 | ||||||
| 3.94 | 66 | 215 | 600 | 195 | 400 | ||||||
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
| ♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
| ♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
| ♦ Granule size of material: mm | ♦ Working environment temperature: °C |
| ♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
| ♦ Handling capacity: t/h | ♦ Quantity: sets |