Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Introduction
High Temperature Resistance Bucket Elevator With Capacity 250t/h is designed to work together with silo, which adopts special belt as the traction components.
High Temperature Resistance Bucket Elevator With Capacity 250t/h specially equipped with 2 kinds of bucket, steel bucket or plastic bucket as an option, to adapt to the transportation of various materials.
High Temperature Resistance Bucket Elevator With Capacity 250t/h is especially suitable for lifting materials with small particle size and loose density less than1t/m3.
High Temperature Resistance Bucket Elevator With Capacity 250t/h is widely used for conveying powder, granular and non-small-block mill and grinding of small materials, such as coal, cement, stones, sand, clay, ore and so on.
Advantages and Features
1.to enhance a wide range of types of materials such hoist, the less performance requirements, not only can improve the general powdery, granular materials, but also enhance the abrasive material sealing the larger, less environmental pollution;
2.the drive power is small, the use into the feeder, induction discharge, large capacity hopper intensive layout almost no recycled material and digging material phenomenon in the material hoist, therefore less reactive power.;
3.long service life, improve feeder to take inflow style, without using excavating bucket, squeeze and collision phenomenon rarely occurs between materials. The machine was designed to ensure that the few scattered in the feed material, unloading, reducing mechanical wear and tear;
4.good operational reliability, advanced design principles and processing methods to ensure the reliability of the machine operation, no down time more than 20, 000 hours. Lifting height high. Smooth hoist operation, so you can upgrade to a higher level.
Technical Parameters
| TZD type Silo Bucket Elevator | |||||||||||
| Model | Belt Width (mm) | Head Pulley Diameter (mm) | Tail Pulley Diameter (mm) | Bucket Speed (m/s) | Head Shaft Rotation Speed (r/min) | Steel Bucket Volume (L) | Steel Bucket Spacing (mm) | Steel Bucket Capacity (t/h) | Plastic Bucket Volume (L) | Plastic Bucket Pitch (mm) | Plastic Bucket Capacity (t/h) |
| TZD200 | 200 | 630 | 500 | 1.76 | 53.5 | 1.21 | 300 | 10 | 1.21 | 300 | 10 |
| 1.76 | 53.5 | 150 | 20 | 150 | 20 | ||||||
| 2 | 60 | 125 | 30 | 125 | 30 | ||||||
| 2.75 | 83.3 | 105 | 50 | 105 | 50 | ||||||
| TZD250 | 250 | 630 | 500 | 1.76 | 53.3 | 2.35 | 150 | 30 | 2.35 | 150 | 30 |
| 1.76 | 53.3 | 125 | 50 | 125 | 50 | ||||||
| 2.42 | 73.5 | 125 | 80 | 125 | 80 | ||||||
| 3 | 91.9 | 125 | 100 | 125 | 100 | ||||||
| TZD300 | 300 | 710 | 565 | 1.93 | 52.5 | 6 | 215 | 80 | 3.1 | 145 | 50 |
| 2.2 | 60 | 215 | 100 | 145 | 80 | ||||||
| 3.05 | 82.2 | 215 | 150 | 145 | 100 | ||||||
| TZD400 | 400 | 710 | 565 | 1.93 | 52.5 | 8.4 | 215 | 100 | 6.1 | 195 | 80 |
| 2.2 | 60 | 215 | 150 | 195 | 100 | ||||||
| 3.05 | 82.2 | 215 | 200 | 195 | 150 | ||||||
| TZD500 | 500 | 800 | 655 | 1.97 | 47 | 10.9 | 215 | 150 | 11.5 | 255 | 100 |
| 2.2 | 52.8 | 215 | 200 | 255 | 150 | ||||||
| 3.1 | 74 | 215 | 300 | 255 | 200 | ||||||
| TZD650 | 650 | 800 | 655 | 2.2 | 52.8 | 2X6 | 215 | 200 | 2X3.1 | 145 | 150 |
| 2.76 | 66 | 215 | 300 | 145 | 200 | ||||||
| 3.87 | 92.5 | 215 | 400 | 145 | 300 | ||||||
| TZD800 | 800 | 1140 | 930 | 2.5 | 41.6 | 2X8.4 | 215 | 400 | 2X6.1 | 195 | 200 |
| 3.15 | 52.5 | 215 | 500 | 195 | 300 | ||||||
| 3.94 | 66 | 215 | 600 | 195 | 400 | ||||||
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
| ♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
| ♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
| ♦ Granule size of material: mm | ♦ Working environment temperature: °C |
| ♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
| ♦ Handling capacity: t/h | ♦ Quantity: sets |