Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Carbon Steel Bulk Buried Scraper Chain Conveyor Gear Motor
Introduction
Carbon steel bulk material buried scraper chain conveyor feeder conveyor is the transportation equipment that depend on the running of scraper chain in the closed casing, which make the material be transported towards presumptive object. It has small volume, good air tightness, good rigidity, flexible technique layout, flexible installation and maintenance, it can be loaded and unloaded on multiple points, so it improve worker's labor condition notably and prevent environment from being polluted. En masse conveyor principle depends on material's endo-attrition and wall pressure, during the material be transported, the pressure comes from scraper chain's moving direction and the push force comes from down material to up material when adding material continuously. The synthesis of these forces enough to overcome the weight of material and the external friction which produce between the casing and material when the machine is running. It makes the material both in the horizontal conveyor, inclined conveyor and vertical conveyor form a continuous material and flow forward.
Carbon steel bulk material buried scraper chain conveyor feeder conveyor is widely used in conveying coal, cement, grain, feed, soda ash, wood, reed and other materials. It is increasingly becoming the transport equipment indispensable of power, light industry, food, chemical, metallurgy and other sectors .
Advantages and Features
1. Totally enclosed structure, without pollution, environmental friendly.
2. Simple structure, convenient installation and maintenance.
3. Horizontal or slightly inclined transport, angle can be from 0° to 30°.
4. Multiple material feeding point and discharging point according to requirement.
5. Trough width can be 160-500mm to meet different material types and capacity.
6. Kinds of scraper chain, to meet different types of material.
7. Conveying distance is up to 80m with material temperature lower than 120℃.
8. With screw take-up device, can take-up itself automatically, to avoid chain take off.
9. Reducer motor brand can be can be domestic or imported: Tailong,,Siemens etc.
10. Can be disassemble into several sections, save space during transportation.
Technical Parameter:
| Scraper Conveyor Technical Performance | ||||||
| Type | MS16 | MS20 | MS25 | MS32 | MS40 | |
| Trough Width | 160 | 200 | 250 | 320 | 400 | |
| Allowed Material Density Range | 0.2-2.5t/m³ | |||||
| Max.Conveying Distance | 120m | |||||
| Conveying Capacity | speed m/s | 0.16 | 0.16 | 0.16 | 0.16 | 0.16 |
| capacity m³/h | 15 | 23 | 36 | 59 | 83 | |
| speed m/s | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | |
| capacity m³/h | 18 | 29 | 45 | 74 | 104 | |
| speed m/s | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | |
| capacity m³/h | 23 | 36 | 56 | 92 | 130 | |
| speed m/s | 0.32 | 0.32 | 0.32 | 0.32 | 0.32 | |
| capacity m³/h | 29 | 46 | 72 | 118 | 166 | |
Selection Conditions
| ♦ Material to be processed: _ | ♦ Installation angle: ___° (if the installation is inclined) |
| ♦ Bulk density: t/m3 | ♦ lifting height: ___m (if there is slope angle) |
| ♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
| ♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |