Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Introduction
Trough Screw Conveyor is a kind of conveying equipment for continuously conveying powder, granular and dry bulk materials.It is composed of bearing seat, spiral blade, spiral shaft, suspension bearing, conveyor housing and transmission device. Single or combination of multiple screw equipment can be used to integrate with each other to meet particular on-site requirements. It has trough type tube with multiple inlets and outlets, which also has inclination angle of maximum 20°. The rotation of the blade is started by the motor, and then the material is transported to the outlet along the spiral line.
Application
Screw conveyor machine is widely used in various industries, such as building materials, chemical industry, electric power, metallurgy, coal charcoal, grain and other industries. It is suitable for conveying powdery, granular and small block materials with horizontally or inclined, such as coal, ash, slag, cement and grain. Etc., the material temperature is less than 200 °C. Screw conveyor machines are not suitable for conveying materials that are prone to deterioration, viscous, and agglomerate. In the concrete mixing station, the role of the screw conveyor is the biggest manifestation.
Technical Parameter:
| LS screw conveyor specification & technical parameters | |||||||||||
| Type | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | LS630 | LS800 | LS1000 | LS1250 | |
| Diameter/mm | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | |
| Screw pitch/mm | 160 | 200 | 250 | 315 | 355 | 400 | 450 | 500 | 560 | 630 | |
| technical parameters | n | 112 | 100 | 90 | 80 | 71 | 63 | 50 | 40 | 32 | 25 |
| Q | 8 | 14 | 24 | 34 | 64 | 100 | 145 | 208 | 300 | 388 | |
| n | 90 | 80 | 71 | 63 | 56 | 50 | 40 | 32 | 25 | 20 | |
| Q | 7 | 12 | 20 | 26 | 52 | 80 | 116 | 165 | 230 | 320 | |
| n | 71 | 63 | 56 | 50 | 45 | 40 | 32 | 25 | 20 | 16 | |
| Q | 6 | 10 | 16 | 21 | 41 | 64 | 94 | 130 | 180 | 260 | |
| n | 50 | 50 | 45 | 40 | 36 | 32 | 25 | 20 | 16 | 13 | |
| Q | 4 | 7 | 13 | 16 | 34 | 52 | 80 | 110 | 150 | 200 | |
| n---Rotation Speed (r/min), Allowable Deviation < 10% Q---Capacity (m3/h), Filling Factor = 0.33 | |||||||||||
Selection Conditions
| ♦ Material to be processed: _ | ♦ Installation angle: ___° (if the installation is inclined) |
| ♦ Bulk density: t/m3 | ♦ lifting height: ___m (if there is slope angle) |
| ♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
| ♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |