Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
8m3/h ~ 150m3/h Auger Screw Conveyor For Preparing Animal Feeds Pics
Introduction
Screw Conveyor is the main units for mechanical transport operation of various departments of industry and agricultures, screw conveyor can be used to reduce labor intensity and improve efficiency. The working temperature of the screw conveyor is usually -20 ~ 40℃, the temperature of the conveying material is generally -20 ~ 80℃, the screw conveyor suitable for horizontal and small angle arrangement, inclination to not exceed 15, if the tilt angle is too large please use GX series screw conveyor.
Advantages and Features
1. With cover and integral sealing structure, no pollution to the environment.
2.The length of conveyor belt can be customized according to your needs.
3. Simple structure, less material consumption, saving cost for you.
4. Conveyor angle can be 0-30 degree. Save space on the site.
5. Screw pitch can be customized according to different material requirements.
6. According to real working conditions, trough screw conveyor machine can be multiple inlets and outlets.
7. Adopt the spiral blade with hanging bearing connecting length greater than 3-4m.
8. Adopts the method of spot welding to weld spiral blade on the screw shaft.
9. Reducer motor brand can be domestic or imported: Tailong, , Siemens etc.
10. Easy to disassemble into several sections, save space during transportation.
Technical Parameter:
| LS screw conveyor specification & technical parameters | |||||||||||
| Type | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | LS630 | LS800 | LS1000 | LS1250 | |
| Diameter/mm | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | |
| Screw pitch/mm | 160 | 200 | 250 | 315 | 355 | 400 | 450 | 500 | 560 | 630 | |
| technical parameters | n | 112 | 100 | 90 | 80 | 71 | 63 | 50 | 40 | 32 | 25 |
| Q | 8 | 14 | 24 | 34 | 64 | 100 | 145 | 208 | 300 | 388 | |
| n | 90 | 80 | 71 | 63 | 56 | 50 | 40 | 32 | 25 | 20 | |
| Q | 7 | 12 | 20 | 26 | 52 | 80 | 116 | 165 | 230 | 320 | |
| n | 71 | 63 | 56 | 50 | 45 | 40 | 32 | 25 | 20 | 16 | |
| Q | 6 | 10 | 16 | 21 | 41 | 64 | 94 | 130 | 180 | 260 | |
| n | 50 | 50 | 45 | 40 | 36 | 32 | 25 | 20 | 16 | 13 | |
| Q | 4 | 7 | 13 | 16 | 34 | 52 | 80 | 110 | 150 | 200 | |
| n---Rotation Speed (r/min), Allowable Deviation < 10% Q---Capacity (m3/h), Filling Factor = 0.33 | |||||||||||
Selection Conditions
| ♦ Material to be processed: _ | ♦ Installation angle: ___° (if the installation is inclined) |
| ♦ Bulk density: t/m3 | ♦ lifting height: ___m (if there is slope angle) |
| ♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
| ♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |