Henan Pingyuan Mining Machinery Co., Ltd
Henan Pingyuan Mining Machinery Co., Ltd Be The Future Global Leader Of Mining Machinery Industry
Add to Cart
Inclined Tubular Screw Conveyor 14~110 m3/h Capacity For Food Industry
Introduction
Auger Screw Conveyor are spiral bulk material transportation systems that convey raw ingredients to and from processing areas that are on different levels of a facility. These conveyors can horizontal transport materials, also it can slanted at different angles to economically elevate and convey materials up and down floors. They require ample space and an increased amount of power to lift the material, depending on the steepness of the angle.
Application
Screw auger conveyor is widely used in building materials, metallurgy, chemical, electric power, coal, machinery, light industry, grain and food industry, suitable for conveying powder, granular, small pieces of materials, such as cement, coal, grain, chemical fertilizer, ash, sand, coke, etc. should not be easily perishable, viscous, easy to agglomerate the material. Commonly seen in the food industry, these conveyors transport ingredients to and from mixers, ovens and vats and need to be sterile at all times. Therefore, they are commonly made of stainless steel, a smooth food grade metal that is less likely to contaminate edible ingredients than other materials and is easily cleaned.
| GX Screw Conveyor Technical Performance | ||||||||
| Type | Length/m | Through put (t/h) | Rotating speed/(r/min) | Reducer | Motor | Weight/kg | ||
| Type | Speed ratio | Type | Power/kW | |||||
| GX200 | 10 | 9 | 60 | YZQ250 | 23.34 | Y90S-4 | 1.1 | 726 |
| GX200 | 20 | 9 | 60 | YZQ250 | 23.34 | Y90L-4 | 1.5 | 1258 |
| GX250 | 10 | 15.6 | 60 | YZQ250 | 23.34 | Y100L1-4 | 2.2 | 960 |
| GX250 | 20 | 15.6 | 60 | YZQ250 | 23.34 | Y100L1-4 | 3 | 1750 |
| GX300 | 10 | 21.2 | 60 | YZQ350 | 23.34 | Y100L2-4 | 3 | 1373 |
| GX300 | 20 | 21.2 | 60 | YZQ350 | 23.34 | Y112M-4 | 4 | 2346 |
| GX400 | 10 | 51 | 60 | YZQ400 | 23.34 | Y132S-4 | 5.5 | 1911 |
| GX400 | 20 | 51 | 60 | YZQ500 | 23.34 | Y160M-4 | 11 | 2049 |
| GX500 | 10 | 87.5 | 60 | YZQ400 | 23.34 | Y132M | 7.5 | 2381 |
| GX500 | 20 | 87.5 | 60 | YZQ650 | 23.34 | Y180M-4 | 18.5 | 5389 |
| GX600 | 10 | 134.2 | 45 | YZQ750 | 23.34 | Y180L-4 | 22 | 3880 |
| GX600 | 10 | 134.2 | 45 | YZQ850 | 23.34 | Y250M-4 | 55 | 7090 |
Selection Conditions
| ♦ Material to be processed:_ | ♦ Installation angle:___° (if the installation is inclined) |
| ♦ Bulk density: t/m3 | ♦ lifting height:__m (if there is slope angle) |
| ♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
| ♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |